There are times when certain buttons and text extend past the boundaries of the IronKey Control Panel.  This is the case if the DPI settings of the host computer are set to higher resolutions.  In order to see all the information on the IronKey Control Panel correctly, you will need to change the DPI settings.  Here are instruction to do this on Windows XP:

1. Right click on your desktop and select "Properties".
2. Go to the "Settings" tab and click the "Advanced" button.
3. In the "General" tab under the "Display" heading there is an option for "DPI Settings".
4. If this is set to Large, try changing it to normal.
 

To adjust the DPI settings in Windows 7 or Vista, use these steps:

1. Right click on your desktop and select "Personalize".
2. In the lower left hand corner, click on the "Display" link.
3. Select the "Smaller - 100% (default)" option.